Today I am going to make cups to place them in my bathroom. After the flat renovation, I had many glass-inlay leftouts and decided to use them to make something.

To do it, you`ll need the following:

1) glass-inlay;

2) glasses;

3) plastic lids;

4) knife;

5) masking tape;

6) grout;

7) tape;

8) superglue.

I diceded to use the cups from this chandelier :)

But there was no bottom! My idea was to use a plastic lid as its diameter fit well!

I cut off extra things with a knife.

Then I fixed the lid to the glass with masking tape for them not to fall when I glue it.

You may use superglue (I used this one).

As soon as the glue had dried, I started decorating! I took a strip of glass-inlay and applied the same glue on it.

I glued it to the glass and fixed with tape.

It was inconvenient to apply glue on the glass-inlay, so I decided to apply it right on the glass.

Then I placed a strip of black glass-inlay.

When the glue dried, I made the grout and began applying it in the joints.

When the grout dried, I wiped it off with wet cloth and then with a dry one for the cups to shine. That's it! The bathroom glasses are ready. They are simple and stylish, and you may keep little things in them.

By the way, I made the surface of the table on which they stand with leftouts of white tile, which was used for the walls. I cut it into squares 6 cm x 6 cm. It turned out very well...