Materials and tools:

- pliers

- cutters

- 0.8 - 0.6 mm wire for the base

- 0.25 - 0.3 mm wire for winding

- two flat gem beads

I took a silverplated wire and agates, you can take any metal and stones. The design of the earrings is simple, so we'll do without a sketch.
Take the 0,8 mm wire, twist a tiny loop at the end, then apply to the bead, measure the needed length, cut off the required piece and curve another end. Make exactly the same detail using the shape of the first wire.

To fix the beads, cut off two identical pieces of the 0.6 mm wire and fasten them as shown below:

Fix the thick wires at the bottom of the beads, add the earring fixture:

All is ready! Put on the new piece of jewellery :) Wish you much inspiration!