Christmas decorations in Scandinavian style are gaining popularity. What if you wamt a cut wood decor but you can't find a pine around?Well, you can imitate the wood pattern.

For this, take:

1. Round plywood blank (or a beer coaster).

2. Plywood figure (or chip board).

3. Chip-boards snowflakes.

4. Scrap paper.

5. Printout.

6. Prime.

7. Acrylic paint.

8. Coating.

9. Glue.

10. Varnish.

11. Sandpaper, brushes, sponges.

12. Ribbon.

Follow the steps.

1. Drill a hole for the ribbon.

2. Prime on both sides and sand.

3. Varnish the printout on two sides. With the face down! Then scrape off the paper leaving onlly the laser applied pattern.

4. Varnish the cut, sand and perfetc with acrylic paints. Then varnish from both sides, sand.

6. Mix coating with brown acrylic paint and apply it with the sponge to create bark.

7. The plywood cat is primed, painted with acrylic paints and varnished.

8. Cut out an envelope from scrap paper, glue it.

9. Apply decorative elements. Put a wish in the envelope.

Now our Christmas pendant with cut tree imitation is ready! ;)

Thank you for your attention!