I urgently needed a big round table!

And we headed to the hardware store with these words.

I wanted a really large one — 150 cm in diameter.

Plywood is sold by 1525 х 1525 mm.

Next, draw a circle — we have immediately primed it, and then applied putty for wood.

Saw out with a jigsaw.

Gently sandpaper the edges, I changed 2 files for wood and the edge was almost perfect.

Fasten legs from the same hardware store.

Prime and covers with an acrylic paint.

Then lay out decoupage pictures.

Glue them with decoupage varnish.

Then work with white "bald patches" :)

And cover it all with 5 layers of water based varnish.

The legs had been grey and metal, one could sandpaper them or, to avoid dusting, cover with a layer of papier-mache, then acrylic paint and varnish.

Chairs did not match the colour scheme, so we quickly painted and varnished them :)

3 days, 7000 rubles and all is done :)